Yes, if you do it indoors. No if you do it outside.
We install in heated indoor bays at our Wadsworth shop. The vehicle and the film come up to temperature before anything is installed. Each of our bays fits an entire semi with tractor attached!.
Cautions in the cold
60°F to 90°F is the best temp for applying wraps and graphics. That’s for both the air and vehicle’s surface temp. (3M Application: Vehicles bulletin). Below that temperature:
- The film cools too fast to hold the heat it needs to stretch.
- The first bond may be too weak to hold the it in place.
- Moisture can condense on a cold surface.
After the wrap goes on
- Keep the vehicle warm for at least 12 hours before it goes out into cold or wet weather. That time strengthens the bond.
- Don’t wash the vehicle for at least 48 hours.
Protect your investment.
A cold, wet vehicle has to dry and warm before install
Before installation begins we wash, dry, and allow air dry time. This also brings the vehicle surface temperature up.
So the order is:
- Clean it.
- Dry it.
- Warm it.
- Apply the wrap or decal.
Our vehicle prep checklist covers what to do before drop-off.
Taking an old wrap off in the cold
Removal is where winter matters most. Wrap film turns brittle in cold weather. It breaks into small pieces as it comes off. Warm up the vehicle first.
Age makes it worse. Older graphics turn brittle and hold on tighter over time. An old wrap on a cold day is double tough.
If you have an old wrap and are getting a new one put on, you’ll need a separate quote for the removal. If you’re concerned about the underlying paint, read do vehicle wraps damage paint.
Booking a wrap in the colder months
Our bays stay filled up pretty much all year. Since we are one of the rare wrap shops with large indoor heated bays, allow up to 2 weeks to schedule your wrap.
See vehicle wraps in Wadsworth for what we wrap. Or request a quote and tell us what you have in mind. Once its on, here’s how to wash a wrapped vehicle in the winter.
FAQ
Can you wrap a car in cold weather?
Not outside in the cold. 3M recommends that the air and the vehicle’s surface both be at least 60°F. If it’s too cool, move the vehicle indoors.
How cold is too cold to remove a vehicle wrap?
Remove film when it’s above 50°F. Colder film turns brittle and breaks into small pieces.
Can a newly wrapped vehicle go out in the snow right away?
Keep the vehicle above 60°F for at least 12 hours before cold or wet weather. Do not to wash it for at least 48 hours.
